![]() In the Services screen, look for the “ TCP/IP NetBIOS Helper“.Ĥ. Then, type “ services.msc” and click on “ OK“.ģ. You have to set the NetBIOS helper service to automatically start.Ģ. Fix 5 – Restart the TCP/IP NetBIOS Helper After that, again click on “ OK” to save the settings.Īfter that, close the Network & Connection settings. Then, click on “ OK” to save the default settings.ĩ. After that, click on the radio button beside the “ Disable NETBIOS over TCP/IP” option.Ĩ. Now, you need to go to the “ WINS” section.ħ. After that, click on the “ Advanced” settings to modify it.Ħ. ![]() To modify “ Internet Protocol Version 4(TCP/IPv4), “ double click on it.ĥ. Now, you need to right-click on your network adapter and then click on “ Properties“.Ĥ. The Network Connections window will open up.ģ. You have to disable the NET BIOS and TCP/IP settings so that WOL can work properly.Ģ.Just write “ ncpa.cpl” and then click on “ OK“. After that, just restart the system to let this change take effect. Then, set the ‘Value:’ to “ 10 Mbps First“. Finally, click on the “ WOL & Shutdown Link Speed“.ġ2. Set the ‘Value:’ to “ Enabled” from the drop-down.ġ1. After that, select the “ Wake on a pattern match” property.ġ0. Same way, set the “ Wake on Magic Packet” to the “ Enabled” setting.ĩ. In the box, scroll down and select the option “ Shutdown Wake-On-Lan“.Ĩ. Then, right-click on the network device (usually the Ethernet driver), and click on “ Properties“.Ħ. When the Run opens up, type “ devmgmt.msc“. Right-click on the Windows icon and click on the “ Run“.Ģ. ![]() ![]() If the previous tweak didn’t solve the issue, you have to toggle the WOL settings manually.ġ. Fix 2 – Turn Off Link State Power Managementġ – Search Edit Power Plan in Windows search box and click on Edit power plan icon from the search result. Try to wake up the remote computer with a WOL request. Then, click on “ Apply” and “ OK” to save these modifications.Īfter that, close the Device Manager window. Only allow a magic packet to wake the computerħ.Allow the computer to turn off this device to save power.Make sure that these three options are checked. Now, go to the “ Power Management” section.Ħ. After that, right-click on the network card this device is using, and then click on the “ Properties“.ĥ. When the Device Manager window appears, expand the “ Network adapters” section.Ĥ. Fix 10 – Disable the Link State Power Managementġ.Fix 6 – Make sure the AC power is plugged in.Fix 5 – Restart the TCP/IP NetBIOS Helper.Fix 2 – Turn Off Link State Power Management.Fix 1 – Allow power usage in Sleep mode.Note: Wake on LAN (WoL) is also known as “Power on by PCI-E/PCI” and “Onboard NIC”, so the feature could also be listed as such on your Windows 10/ 11 PC. Now, you need to enable it, save the configuration, and restart your PC. If the option is not there, try for it under other tabs. When the BIOS opens up, move to the “ Advanced” or “Power Management” tab to find Wake on LAN. While your computer is booting up, you need to press the BIOS key, and you will enter the BIOS/ UEFI screen.Ģ. Generally, it is the F10, F2, Del, or Esc keys, but if they don’t work, look for the specific boot key for the motherboard or laptop off the internet. To do so, you need to open the BIOS/ UEFI screen by pressing the BIOS key, which is different for every computer. Before you enable Wake on LAN, you need to turn it on from the BIOS/ UEFI screen. Note: We will demonstrate the steps to enable Wake on LAN on our Windows 11 PC, but the steps will remain the same for a Windows 10 computer as well.ġ. Turn on Wake on LAN (WoL) on Your Windows 11/ 10 PC
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |